Horse Barns

This is a 24x48 open front barn with painted metal roof, sides and trim, a 12x24 garage/storage and loft section, three 12x12 stalls with dutch doors, a one foot boxed eave and end overhang, and a 4x4 cupola.


This is a 36x36 barn with a 10x36 shed on one side. It has a raised center roof over the aisle that accommodates a 12x36 loft. It has rough-cut oak board-and-batten siding with a metal roof.
The siding just under the eave on the raised section is a translucent panel to let in natural light.


This is a 36x60 barn with painted T1-11 siding and a shingle roof.
The stalls open to the back through dutch doors into the run-in shed.


This is an example of a standard stall front with grill sections and a 4x8 sliding door.
The fronts, including the door, can be built solid (without the grill sections).
The partitions between the stalls can be built the same as the fronts.
Note the two pieces of treated lining at the floor level and the untreated lining going up the rest of the way.
2x8 yellow pine is commonly used. Some customers want tongue-and-groove.